CRE6959UHEA-S8
General Description:
TypeC+USB dual port output 18WPD based on CRE6959UHEA-S8, synchronous rectification, PD scheme design.
CRE6959UHEA Datasheet>> |
Features:
Vin:AC90-264V
Po:18W
Vo:5V 9V 12V
Io :5V3A 9V2A 12V1.5Aη:η>85% |
Schematic diagram
PCB
Picture of real products
Test Datasheet
1,Efficiency & Regulation and Ripple@5V3A Port C | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 0.033 | 5.018 | 0 | 0.8725 | CoC 81.835 DoE 81.385 | |||
4.24 | 5 | 0.75 | 3.75 | 0.8844 | ||||
8.44 | 4.98 | 1.5 | 7.47 | 0.885 | ||||
12.79 | 4.95 | 2.25 | 11.14 | 0.8709 | ||||
17.4 | 4.93 | 3 | 70 | 14.79 | 0.85 | |||
115 | 0.038 | 5.018 | 0.8807 | |||||
4.23 | 5 | 0.75 | 3.75 | 0.8865 | ||||
8.43 | 4.98 | 1.5 | 7.47 | 0.8861 | ||||
12.64 | 4.95 | 2.25 | 11.14 | 0.8813 | ||||
17.02 | 4.93 | 3 | 14.79 | 0.8689 | ||||
230 | 0.065 | 5.018 | 0 | 0 | 0.8657 | |||
4.39 | 5 | 0.75 | 3.75 | 0.8542 | ||||
8.59 | 4.98 | 1.5 | 7.47 | 0.8696 | ||||
12.83 | 4.95 | 2.25 | 11.14 | 0.8682 | ||||
16.98 | 4.93 | 3 | 14.79 | 0.871 | ||||
264 | 0.08 | 5.018 | 0 | 0.8589 | ||||
4.44 | 5 | 0.75 | 3.75 | 0.8445 | ||||
8.65 | 4.98 | 1.5 | 7.47 | 0.8635 | ||||
12.94 | 4.95 | 2.25 | 11.14 | 0.8608 | ||||
17.06 | 4.93 | 3 | 68 | 14.79 | 0.8669 | |||
2,Efficiency & Regulation and Ripple@9V2A Port C | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 9.03 | 0.8859 | CoC 85.452 DoE 85.002 | |||||
5.12 | 9.02 | 0.5 | 4.51 | 0.8808 | ||||
10.04 | 9 | 1 | 9 | 0.8964 | ||||
15.18 | 8.98 | 1.5 | 13.47 | 0.8873 | ||||
20.4 | 8.97 | 2 | 78 | 17.94 | 0.8794 | |||
115 | 9.03 | 0.8912 | ||||||
5.11 | 9.02 | 0.5 | 4.51 | 0.8825 | ||||
10.05 | 9 | 1 | 9 | 0.8955 | ||||
15.06 | 8.98 | 1.5 | 13.47 | 0.8944 | ||||
20.1 | 8.97 | 2 | 17.94 | 0.8925 | ||||
230 | 9.03 | 0.888 | ||||||
5.22 | 9.02 | 0.5 | 4.51 | 0.8639 | ||||
10.13 | 9 | 1 | 9 | 0.8884 | ||||
15.03 | 8.98 | 1.5 | 13.47 | 0.8962 | ||||
19.85 | 8.97 | 2 | 17.94 | 0.9037 | ||||
264 | 9.03 | 0.8798 | ||||||
5.26 | 9.02 | 0.5 | 4.51 | 0.8574 | ||||
10.29 | 9 | 1 | 9 | 0.8746 | ||||
15.11 | 8.98 | 1.5 | 13.47 | 0.8914 | ||||
20.02 | 8.97 | 2 | 62 | 17.94 | 0.8961 | |||
3,Efficiency & Regulation and Ripple@12V1.5A Port C | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 12.09 | 0.8803 | CoC 85.45 DoE 85.002 | |||||
5.26 | 12.08 | 0.375 | 4.53 | 0.8612 | ||||
10.21 | 12.06 | 0.75 | 9.05 | 0.8863 | ||||
15.2 | 12.05 | 1.125 | 13.56 | 0.8921 | ||||
20.48 | 12.04 | 1.5 | 82 | 18.06 | 0.8818 | |||
115 | 12.09 | 0.8961 | ||||||
5.11 | 12.08 | 0.375 | 4.53 | 0.8864 | ||||
10.05 | 12.06 | 0.75 | 9.05 | 0.9004 | ||||
15.06 | 12.06 | 1.125 | 13.56 | 0.9003 | ||||
20.12 | 12.04 | 1.5 | 18.06 | 0.8976 | ||||
230 | 12.09 | 0.8866 | ||||||
5.3 | 12.08 | 0.375 | 4.53 | 0.8547 | ||||
10.19 | 12.07 | 0.75 | 9.05 | 0.8881 | ||||
15.1 | 12.06 | 1.125 | 13.56 | 0.898 | ||||
19.94 | 12.04 | 1.5 | 18.06 | 0.9057 | ||||
264 | 12.09 | 0.8769 | ||||||
5.37 | 12.08 | 0.375 | 4.53 | 0.8435 | ||||
10.39 | 12.06 | 0.75 | 9.05 | 0.871 | ||||
15.13 | 12.06 | 1.125 | 13.56 | 0.8962 | ||||
20.13 | 12.04 | 1.5 | 62 | 18.06 | 0.8971 | |||
4,Efficiency & Regulation and Ripple@5V3A Port A | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 5.02 | 0.8757 | CoC 81.835 DoE 81.385 | |||||
4.22 | 5 | 0.75 | 3.75 | 0.8886 | ||||
8.42 | 4.98 | 1.5 | 7.47 | 0.8871 | ||||
12.75 | 4.96 | 2.25 | 11.16 | 0.8752 | ||||
17.39 | 4.94 | 3 | 14.82 | 0.8522 | ||||
115 | 5.02 | 0.8829 | ||||||
4.22 | 5 | 0.75 | 3.75 | 0.8886 | ||||
8.41 | 4.98 | 1.5 | 7.47 | 0.8882 | ||||
12.62 | 4.96 | 2.25 | 11.16 | 0.8843 | ||||
17.02 | 4.94 | 3 | 14.82 | 0.8707 | ||||
230 | 5.02 | 0.8694 | ||||||
4.36 | 5 | 0.75 | 3.75 | 0.86 | ||||
8.57 | 4.98 | 1.5 | 7.47 | 0.8716 | ||||
12.79 | 4.96 | 2.25 | 11.16 | 0.8725 | ||||
16.96 | 4.94 | 3 | 14.82 | 0.8738 | ||||
264 | 5.02 | 0.8583 | ||||||
4.45 | 5 | 0.75 | 3.75 | 0.8426 | ||||
8.67 | 4.98 | 1.5 | 7.47 | 0.8615 | ||||
12.95 | 4.96 | 2.25 | 11.16 | 0.8617 | ||||
17.08 | 4.94 | 3 | 14.82 | 0.8676 | ||||
5,Efficiency & Regulation and Ripple@9V2A Port A | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 9.05 | 0.8888 | CoC 85.452 DoE 85.002 | |||||
5.11 | 9.03 | 0.5 | 4.52 | 0.8845 | ||||
10.04 | 9.02 | 1 | 9.02 | 0.8984 | ||||
15.18 | 9.01 | 1.5 | 13.52 | 0.8906 | ||||
20.41 | 9 | 2 | 18 | 0.8819 | ||||
115 | 9.05 | 0.8941 | ||||||
5.1 | 9.03 | 0.5 | 4.52 | 0.8862 | ||||
10.04 | 9.02 | 1 | 9.02 | 0.8984 | ||||
15.06 | 9.01 | 1.5 | 13.52 | 0.8977 | ||||
20.13 | 9 | 2 | 18 | 0.8941 | ||||
230 | 9.05 | 0.8915 | ||||||
5.21 | 9.03 | 0.5 | 4.52 | 0.8675 | ||||
10.12 | 9.02 | 1 | 9.02 | 0.8913 | ||||
15.01 | 9.01 | 1.5 | 13.52 | 0.9007 | ||||
19.85 | 9 | 2 | 18 | 0.9068 | ||||
264 | 9.05 | 0.8822 | ||||||
5.25 | 9.03 | 0.5 | 4.52 | 0.8609 | ||||
10.31 | 9.01 | 1 | 9.01 | 0.8739 | ||||
15.08 | 9.01 | 1.5 | 13.52 | 0.8965 | ||||
20.05 | 9 | 2 | 18 | 0.8977 | ||||
6,Efficiency & Regulation and Ripple@12V1.5A Port A | ||||||||
*Note: Output voltage is measured at plate End | ||||||||
VIN | PIN | VOUT | IOUT | VRIPPLE | POUT | η | Average | Standard |
(VAC) | (W) | (V) | (A) | (mVP-P) | (W) | (%) | η(%) | η(%) |
90 | 12.11 | 0.8841 | CoC 85.45 DoE 85.002 | |||||
5.19 | 12.1 | 0.375 | 4.54 | 0.8747 | ||||
10.2 | 12.09 | 0.75 | 9.07 | 0.8892 | ||||
15.28 | 12.08 | 1.125 | 13.59 | 0.8893 | ||||
20.49 | 12.07 | 1.5 | 18.1 | 0.8833 | ||||
115 | 12.11 | 0.8918 | ||||||
5.17 | 12.1 | 0.375 | 4.54 | 0.8781 | ||||
10.16 | 12.09 | 0.75 | 9.07 | 0.8927 | ||||
15.13 | 12.08 | 1.125 | 13.59 | 0.8982 | ||||
20.15 | 12.07 | 1.5 | 18.1 | 0.8982 | ||||
230 | 12.11 | 0.8898 | ||||||
5.28 | 12.1 | 0.375 | 4.54 | 0.8598 | ||||
10.18 | 12.09 | 0.75 | 9.07 | 0.8909 | ||||
15.08 | 12.08 | 1.125 | 13.59 | 0.9011 | ||||
19.94 | 12.07 | 1.5 | 18.1 | 0.9077 | ||||
264 | 12.11 | 0.8804 | ||||||
5.35 | 12.1 | 0.375 | 4.54 | 0.8485 | ||||
10.37 | 12.09 | 0.75 | 9.07 | 0.8746 | ||||
15.11 | 12.08 | 1.125 | 13.59 | 0.8994 | ||||
20.13 | 12.07 | 1.5 | 18.1 | 0.8991 |
NO. | RefDes | Part | Description | Package | Count | Soldering | unit cost |
---|
Toal:
BOM Cost
Part Cost | Count | ¥ | ||
SMT Cost | Count | ¥ | ||
Plug-in Cost | Count | ¥ | ||
Total | ¥ |
1.Cost accounting can help you calculate the Demo cost more conveniently.
2.You only need to select the processing type, fill in the unit price of the device, and click "Confirm" to submit. Thesystem will automatically calculate the cost for you.
3.You can also modify the unit price according to your actual needs for calculation.
2.You only need to select the processing type, fill in the unit price of the device, and click "Confirm" to submit. Thesystem will automatically calculate the cost for you.
3.You can also modify the unit price according to your actual needs for calculation.